Hoverboard Go-Kart Attachment DXF Files
Hoverboard Go-Kart Attachment DXF Files
Couldn't load pickup availability
Turn your regular hoverboard into a fully functional go-kart for kids with this fun CNC project!
These DXF files let you cut and build a sturdy attachment that easily mounts to most hoverboards.
The kart is controlled by tilting the handles forward to accelerate and backward to slow down, giving a smooth, exciting ride.
A perfect weekend build that adds new life and endless fun to any hoverboard!
Supported CNC sizes
Supported CNC sizes
Max single piece size
Max single piece size
So if it can fit on your CNC router, you can build this project
Dimensions
Dimensions
| Width | Length | Height |
|---|---|---|
| 720 mm | 430 mm | 390 mm |
| 28⅜ inch | 16⅞ inch | 15⅜ inch |
Required materials
Required materials
For a 600 x 900 mm (2 x 3 ft) CNC:
- a sheet of 600 x 900 x 12 mm (24 x 36 x 1/2 inches) plywood
- a sheet of 700 x 350 x 12 mm (29 x 15 x 1/2 inches) plywood
- 1 caster wheel
- hoverboard
- 2 ratchet straps - 1 m each (~3 ft)
- 30 mm (1-/14 inch) wood screws - 30 pieces
- 12 mm (1/2 inch) wood screws - 4 pieces
- rollerblade bearings - 4 pieces (22 mm outer diameter)
- M8 x 60 - fully-threaded screw - 2 pieces
- M8 locknuts - 2 pieces
- M8 washers - 4 pieces (large ones)
- M8 nut - 2 pieces
For a 820 x 1220 mm (2.6 x 4 ft) CNC and bigger:
- a sheet of 625 x 1220 x 12 mm (25 x 48 x 1/2 inches) plywood
- 1 caster wheel
- hoverboard
- 2 ratchet straps - 1 m each (~3 ft)
- 30 mm (1-/14 inch) wood screws - 30 pieces
- 12 mm (1/2 inch) wood screws - 4 pieces
- rollerblade bearings - 4 pieces (22 mm outer diameter)
- M8 x 60 - fully-threaded screw - 2 pieces
- M8 locknuts - 2 pieces
- M8 washers - 4 pieces (large ones)
- M8 nut - 2 pieces
Approximate CNC time
Approximate CNC time
Assembling time
Assembling time
Share
